Advance Safety In Two Wheeler

Abstract

One of the problem that we are experiencing during travelling on road surface the number of times accident is happened when side stand of the bike is not take up while, it only due to the carelessness of the driver or any emergency. It wills leads to fatal accidents and savior injury to the driver as well as pillion. The number of times accidents is happened on the road due to the released condition of side stand of bike during its running. In India the number of road accidents are happened in every year is near about 3500 to 4000 as per the survey. So, to avoid this we find the new solution over it i.e. ?Advance Safety Stand in Two Wheeler?. So, it will totally help to avoid the percentage of road accidents due to the arrangement of side stand in two wheeler. Our idea is that until & unless we do not take up the stand of the bike it will not start. Whenever bike is parked on side stand and if anybody tries to start the bike, it doesn?t possible because the air which is required for combustion process is not passed in to the carburetor and proper air-fuel mixture is not takes place inside it, so the bike will not start either by cell or kick. In our project we design the piston and cylinder arrangement which is place near to the air filter in which it passes pure air into the carburetor. Due to the arrangement of piston and cylinder the air inlet valve is open and close as per the movement of the side stand in up and down. The piston is connected to the stand through the inner lining wire. The main function of it is to provide the safety to the driver, pillion and vehicle.